AFE4300EVM: Change frequency excitation current

Joy Eric Gisler

Other Parts Discussed in Thread: AFE4300

Hello everyone,

I want to change the frequency of the excitation current BCM assessment in FWR mode .I tried changing it in the GUI, in the Low-level settings and even in the CalibConst file but the program always changes it back to 50 kHz. Has anybody else already encountered this problem?

Tank you for your help!

Joy

over 9 years ago

0 Praveen Aroul over 9 years ago

TI__Mastermind 49956 points

Hello Joy,

We have received your inquiry about the frequency assignment in the FWR mode of AFE4300 using the GUI and will get back to you shortly.

0 Praveen Aroul over 9 years ago

TI__Mastermind 49956 points

Hi Joy,

Changing the excitation current frequency through the BCM measurement tab can be done only when the GUI is not running.
You will need to change the frequency in the CalibConst file, save the file and then start the GUI.

Data converters

Data converters forum

AFE4300EVM: Change frequency excitation current