How Can i Acquire Signal Directly from Patient using ADS1298ECG-PDK

Hamid Saeed

Other Parts Discussed in Thread: ADS1298

I am using ADS 1298 and we are acquiring signal from a human body. The acquired signal is so much noisy, and there is no sign of ECG signal. It is very difficult for me and even confusing that why it is happening like this. Help from everyone is requested and will be appreciated.

over 9 years ago

0 Brian Pisani over 9 years ago

TI__Mastermind 38745 points

Hello Hamid,

Unfortunately we cannot advise you on receiving signals from a live patient using the EVM since that product does not have any regulatory clearance for human contact. The EVM is for evaluation purposes only and is intended to receive signals from a patient simulator.

Brian

0 Hamid Saeed over 9 years ago in reply to Brian Pisani

Prodigy 60 points

But sir i am getting nothing out of it there is just noise in the output i don't know what is going wrong. i think i should get some sort of ECG signal out of it

0 Brian Pisani over 9 years ago in reply to Hamid Saeed

TI__Mastermind 38745 points

Hey Hamid,

If you want to experiment with the ADS1298 using the EVM, I would recommend you use a patient simulator. Otherwise I will not be able to provide you with advice.

Brian

Data converters

Data converters forum

How Can i Acquire Signal Directly from Patient using ADS1298ECG-PDK