• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 885 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8688EVM-PDK source code

Eui-Heon Jung
Expert 1115 points
Other Parts Discussed in Thread: ADS8688EVM-PDK

Dear all,

I want to make DAQ system consist of three  ADS8688EVM (24 channel ADCs) and GUI.

In my think, the simple modification of original source code is best way for me to make system.

Where can I get the source code of ADS8688EVM-PDK GUI and Simple capture card to do this?

Sincerely,

Eui-heon

  • 0
    TI__Mastermind 45785 points

    Hello Eui-heon,
    Unfortunately, we don't have a source code for this because it's developed by LabVIEW, but we have other common C/C++ source code based TI's C2000 MCU, would you like to refer to it?

    Thanks&Regards
    Dale

  • 0 in reply to Dale Li
    Expert 1115 points
    Hello Dale,

    Thank you for your reply.
    If the communication protocol which was applied to your C/C++ source code based TI's C2000 MCU is same, I can make GUI without modifying source code of Simple Capture Card. If not, I'll make new hardware. In this case, C/C++ source code based TI's C2000 MCU also helpful to me.

    Sincerely,
    Eui-heon.