• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 502 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12D1600CVAL or ADC10D1000CVAL PCB layout data

masahiko shimizu
Guru 11235 points

Hi,

My customer wants PCB layout data of ADC12D1600CVAL or ADC10D1000CVAL.
Could you give me this data, please?

If you can, could you give me this data as ".brd file"?

Best regards,
Shimizu

  • 0
    TI__Genius 17125 points

    Hi Shimizu,

    I am investigating how best to get you the files, as they are large.

    But, I would like to ask why the customer would like these particular board files.  They are very basic boards that allow connection of the parts to a logic analyzer for data capture.   We might have other documents that may be of more use to the customer.

    We have this guide for board layout:

    Also, we have a reference board for these ADCs.   The ADC12D1600RFRB reference board will work with the space products.   The footprint for the active pins is the same.   The only difference is a solder mask change is needed due to the different configuration of the heatslug ground balls/columns.   The board documents are available on the product page:

    www.ti.com/.../ADC12D1600RFRB

    Please let me know if these documents meet your customer's needs.