• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 430 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RE: ADS9110EVM-PDK Zone 1 operation

Robert Phillips16684
Intellectual 500 points
Other Parts Discussed in Thread: ADS9110, ADS9110EVM-PDK
There is a comment in the post by Luis Chioye "I believe the ADS9110EVM-PDK evaluation kit firmware supports Zone1  operation; with Single, Dual or Quad SDO; but will confirm.  I will follow with you directly via email with this request. "
 
Question : What was the final outcome, does the EVM support Zone 1?
 
If it does support Zone 1 then is there any way to use the EVM to test the operational modes suggested in the post by Luis Chioye?If not, then this will leave us with a serious problem and might mean that we have to chose another device altogether.
 
Robert#
 
  • 0
    TI__Guru 55466 points
    Hi Robert,

    Thank you for your interest on the ADS9110 device.

    I started a new post with your request since you are interested in Zone 1 and the previous post was a request for Zone2 operation. The currently released ADS9110EVM-PDK firmware is configured to support Zone1 operation with either single, dual or quad SDO mode.

    Please let me know if you have any questions,

    Thank you and Best Regards,
    Luis