• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 665 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Could ADS54J66 Eval Kit communicate directly with Matlab?

yuzhen ma
Intellectual 270 points

Other Parts Discussed in Thread: ADS54J66, ADS54J66EVM

Could  ADS54J66 Eval Kit communicate directly with Matlab without its HSDC Pro?

Without TSW14J56EVM, are there any other ways to acquire data from ADS54J66?

Or are there any other tools to evaluate/test ADS54J66 Eval Kit without TSW14J56EVM/HSDC Pro.

Many thanks

  • 0
    TI__Guru* 91947 points

    Yuzhen,

    You could use an Altera or Xilinx FPGA development platform if it has an FMC connector to capture data from the ADS54J66EVM. There is firmware that exists for both that you could possibly use with only minor changes depending on what platform you actually select. The problem with this is these platforms are more expensive than the TSW14J56EVM. I do not know of any other options to capture data other than this.

    Regards,

    Jim