• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 1061 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE5809EVM: AFE5809GUI configuration

Naik
Intellectual 720 points
Part Number: AFE5809EVM
Other Parts Discussed in Thread: AFE5809

Hello,

I want to save all the values that I edit in AFE5809GUI to AFE5809 chip, so everytime I powerup a device it loads my last saved values (SPI logic for each block of AFE) instead of default '0'.  

Is there a document that can help me to understand GUI ?  I couldn't found this info in datasheet or maybe I missed it, Can someone please help me. 

Thanks.

  • 0
    TI__Mastermind 49746 points
    Hi Vatsal,

    There is no way to power up the device with the last saved values.

    However you could use the Recording feature provided in the GUI to save a sequence of commands and loads the commands from the saved file after starting the GUI for the next time.

    Here is the procedure to follow:

    1. Start the GUI
    2. Click on 'Software Reset' button to issue a reset and load the EVM default values
    3. Click on 'Record Commands' button
    4. Configure the AFE.
    5. Click on 'Save Commands' button. This will open up a dialog box to save the file. Choose the folder and save the file as an *.cfg file.
    6. Restart the GUI.
    7. Click on 'Software Reset' button
    8. Load the previously saved configuration file by clicking on 'Exec CMD file' button.
  • 0 in reply to Praveen Aroul
    Intellectual 720 points

    Hi Praveen,

    ok, What about the register's / profile ram values?

    So, It says it doesn't have default values, Once I configure my AFE chip using GUI all values in register will be same after power off?