ADS131A04EVM: USB generic bulk driver

LH Ji

Part Number: ADS131A04EVM

I ordered this new ADS131A04EVM yesterday. However I can't install the USB "generic bulk device" driver neither on Windows 10 nor Windows 7.

I used manual installation according to User Manual. It reported corrupted hash code error. Anyone there can tell me where I can I download the correct driver?

Thanks,

over 7 years ago

0 Brian Pisani over 7 years ago

TI__Mastermind 38745 points

Hello LH Ji46,

Both pieces of software you need, both the GUI and the "device package" can be downloaded from the EVM product page. Let me know if you have already installed the correct software and it is still not working.

Regards,

Brian Pisani

0 LH Ji over 7 years ago in reply to Brian Pisani

Prodigy 100 points

I did exactly as you said. The problem is the driver. Windows report "...ended prematurely because an error,..." every time I run the installer.

0 Brian Pisani over 7 years ago in reply to LH Ji

TI__Mastermind 38745 points

LH Ji46,

You may have to do some manual debugging, unfortunately. Try the recommendations in Section 2.3.2 in the Delta-Sigma ADC EvaluaTIon Software User Manual.

Regards,

Brian Pisani

Data converters

Data converters forum

ADS131A04EVM: USB generic bulk driver