ADC12D1x00RFRB

Ashok Reddy1

Dear all,

I am using the ADC12D1x00RFRB evaluation board from TI. I downloaded reference schematic from the TI website. The reference designators are not matching with the board. Can any please help me to download the correct schematic and source code files for the above mentioned evaluation board.

Thanks & regards,

C Ashok Reddy

over 8 years ago

0 LeonardEllis over 8 years ago

TI__Guru 71526 points

Hello Ashok,

I'm wondering if you looked at the schematic on the page: www.ti.com/tool/adc12d1600rfrb , and the design files are there as well. If so, how does your eval board differ from the one downloaded from this Product Folder?

Can you include a picture of the eval board you have, showing any nomenclature/markings?

~Leonard

0 Ashok Reddy1 over 8 years ago in reply to LeonardEllis

Prodigy 250 points

Dear Leonard,

Here I am attaching the board image and PLL Image. Schematic Image of PLL. Here the PLL part reference in schematic and on board is different.

Thanks & Regards,

C Ashok Reddy.

0 Jim Brinkhurst1 over 8 years ago in reply to Ashok Reddy1

TI__Mastermind 44570 points

Hi Ashok

Thanks for the photos of the board, that really helps.

Since your board has a relay near the EXT CLK connector and has a 7.5V power input I know that it is actually an older revision. Here are the files for the board that you have.

/cfs-file/__key/communityserver-discussions-components-files/73/3583.adc12d1x00rfrb_5F00_design_5F00_package.zip

Best regards,

Jim B

Data converters

Data converters forum

ADC12D1x00RFRB