ADS1602: Gerber Files Required

Rami Abu Shammeh

Part Number: ADS1602

Hello guys!

I was wondering if any of the engineers have the Gerber files for the circuitry of the ADS1602 available? If so, can they please be forwarded to me? For reference, I am looking for the Gerber files for the following attached circuitry (pulled from the ADS1602 User Guide)

slau147.pdf

over 8 years ago

0 Tom Hendrick over 8 years ago

TI__Guru**** 180771 points

Hi Rami,

Welcome to the e2e Forum! Here are the ADS1602 Gerber files you asked for.

ADS1601_02 Rev A.zip

0 Rami Abu Shammeh over 8 years ago in reply to Tom Hendrick

Prodigy 40 points

Thank you so much for the swift reply!

0 Rami Abu Shammeh over 8 years ago in reply to Tom Hendrick

Prodigy 40 points

Are the schematic files for this available as well? Or is there a way for me to make edits to the Gerber files themselves?

I use Eagle for PCB design.

0 Tom Hendrick over 8 years ago in reply to Rami Abu Shammeh

TI__Guru**** 180771 points

Hi Rami,

There are tools out there which can read Gerber files and create a netlist so that you can directly edit the files, but I'm not familiar enough with Eagle to say if it's possible to do editing with that tool. The original ADS1602 database was created using Protel99SE. If you have a means to import the database, I can provide the original files.

0 Rami Abu Shammeh over 8 years ago in reply to Tom Hendrick

Prodigy 40 points

I'll look into it and get back to you. Thanks again for the quick replies, Tom!

Data converters

Data converters forum

ADS1602: Gerber Files Required