• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 48 subscribers
  • Views 797 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS7841-Q1: Power supply interruption

Kaji@PAN
Mastermind 8070 points

Part Number: ADS7841-Q1

Hi,

I am checking whether the IC may not operate properly depending on the instant of power supply interruption time and the value of power supply voltage.
The figure below is an image. Are there any conditions that cause problems?

Best Regards,

  • 0
    TI__Genius 16890 points

    Hello,

    If the supply goes below the minimum supply specification there is the possibility that the part will lose the register setting.  In a case like this, when the supply comes back up the register value should be written to the device again.

    Mike