ADC32RF45EVM: About the source code of 204B for connecting ADC32RF45EVM with Arria10

Toshiyuki

Part Number: ADC32RF45EVM
Other Parts Discussed in Thread: ADC32RF45, , ADC12DJ3200

Hi,

Our customer is considering ADC32RF45. Then, they would like to evaluate ADC32RF45EVM by using their FPGA board. They used Altera JESD204B IP core to interface the ADC. So, would you please provide the source code of 204B for connecting ADC32RF45EVM with Arria10? If not, is there any Reference Design?

Best Regards,

Toshiyuki

over 8 years ago

0 Ken C over 8 years ago

TI__Genius 12965 points

Hi Toshiyuki,

We do not have a specific reference design for the ADC32RF45, But we do have a reference design for the Megacore IP block interfacing to ADC12DJ3200. Although this is not the same device, it does show how to configure the JESD204B IP block in Quartus. It follows the same flow as described in the Altera JESD204B users guide.

www.ti.com/.../slac748

Ken.

0 Toshiyuki over 8 years ago in reply to Ken C

Mastermind 7075 points

Hi Ken - san,

Thank you for the reply. Please let me know how to use this Firmware installer.

Best Regards,

Toshiyuki

0 Ken C over 8 years ago in reply to Toshiyuki

TI__Genius 12965 points

Hi Toshiyuki,

You run the installer, it will install the source files into a directory (you can use the default or change to your own directory).

Inside the install directory you will find a zip file which will contain pdf instructions on how to use the included .qar source file.

Ken.

Data converters

Data converters forum

ADC32RF45EVM: About the source code of 204B for connecting ADC32RF45EVM with Arria10