• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 448 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1298R with Plessey Sensors

seif abdelmegeed
Prodigy 10 points
Other Parts Discussed in Thread: ADS1298R

Hi everybody,

I am currently using the same Plessey sensors with the ADS1298RECG , and i can only get noise, please if someone has tried this and got some results (even noisy ones) please contact me as i need this information urgently,

Datasheet: http://www.plesseysemiconductors.com/wp-content/uploads/ps25101-epic-sensor-development-sensor-high-gain-datasheet.pdf


Best Regards,

  • 0
    TI__Guru 66186 points
    Hello Seif,

    Thanks for your interest in our ADS1298R.

    For starters, are you using the ADS1298RECG-FE with the provided software? Have you evaluated the EVM without the Plessey sensors to confirm your setup is correct and obtain a baseline of expected performance? My first recommendation would be to use a reliable signal source (i.e. a function generator) without the Plessey sensors in the signal path.

    If you still have issues getting the EVM to work properly without the sensors, please share some data captures, a description of your input signal connections, and the complete register settings for the ADS1298R.

    Best Regards,