ADS5263EVM: Interfacing ADS5263 evaluation board with the kintex KC705 / zynq ZC702 FPGA board through FMC connector

pradnya dalvi

Part Number: ADS5263EVM

Is their any connector available to connect ADS5263 evaluation board with the kintex KC705 / zynq ZC702 FPGA board through FMC connector?

over 7 years ago

0 Olu Sodipe over 7 years ago

TI__Expert 4145 points

Hi Pradnya,

This FMC-ADC adapter should work. You can verify by comparing Page 35 of the ADS5263EVM's user guide with the adapter's schematic page.

Sincerely,

Olu

0 pradnya dalvi over 7 years ago in reply to Olu Sodipe

Prodigy 20 points

The above provided link i.e. www.ti.com/.../FMC-ADC-ADAPTER does not provide any information related to the ADS5263EVM so is that FMC-ADC connector compatible with ADS5263EVM or is there any other solution ?

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Data converters

Data converters forum

ADS5263EVM: Interfacing ADS5263 evaluation board with the kintex KC705 / zynq ZC702 FPGA board through FMC connector