• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 46 subscribers
  • Views 590 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW14J56EVM: Capture Board

Ryuuichi machida
Guru 12620 points

Part Number: TSW14J56EVM

Hi,

I would like you to ask about TSW series capture board.

I'm looking for high speed ADC capture board which is implemented Xilinx FPGA.

Recent capture EVM (such as TSW14J56), it seems that Altera FPGA is almost used.

Do you shift to use Altera FPGA from Xilinx FPGA ?

If you have TSW capture board which is implemented Xilinx FPGA and we can buy, could you please let me know ?

Best Regards,

  • 0
    TI__Guru* 91947 points

    Ryuuichi,

    We do not have any Xilinx based capture boards. We do though offer firmware and software that will allow you to use existing Xilinx development boards, such as the VC707, ZC706, KC705 and KCU105 as capture  boards that will work with our JESD204B based ADC EVM's. 

    Regards,

    Jim

  • 0 in reply to jim s
    Guru 12620 points

    Hi Jim-san,

    Thank you for your reply.

    Understood for Capture Board.

    In addition, I have a question.

    * Should user need to take care about license fee to use JESD204B ?

    I think that JESD204B IP core is licensed by FPGA vendor, so the question is whether user need to pay additional money or not.

    Best Regards,

  • 0 in reply to Ryuuichi machida
    TI__Guru* 91947 points

    Ryuuichi,

    Most FPGA vendors will charge a license fee for a JESD204B IP core. You will need a license to do a recompile of the source code that is provided on our website.

    Regards,

    Jim