ADC12J4000EVM: ADC12J4000EVM Rev. E3 dimensions

Vasya Pupkin

Prodigy 40 points

Part Number: ADC12J4000EVM

Hi, all !

Where i can find gerber or/and cad file for the ADC12J4000EVM Rev. E3? I need dimensions

over 7 years ago

0 high speed guy over 7 years ago

TI__Expert 3505 points

Hi Vasya,

Have you checked the design package download found in the Key Documents section of the ADC12J4000EVM folder?

Regards,
Mark

0 Vasya Pupkin over 7 years ago in reply to high speed guy

Prodigy 40 points

As i see It's only Rev. A. I need E3

0 high speed guy over 7 years ago in reply to Vasya Pupkin

TI__Expert 3505 points

We are in the process of verifying if both revisions are of the same dimensions.

0 Jim Brinkhurst1 over 7 years ago in reply to Vasya Pupkin

TI__Mastermind 44680 points

Hi Vasya

Revision E3 was an earlier Engineering revision of the board that was used for early production.

Revision A is the version we are shipping now.

Best regards,

Jim B

0 Vasya Pupkin over 7 years ago in reply to Jim Brinkhurst1

Prodigy 40 points

Hi Jim

I know that the E3 was an earlier revision of board. I'm working with E3 (for a long time) version and A version, and want to know mounting hole and connector coordinates not only for A rev.

0 Jim Brinkhurst1 over 7 years ago in reply to Vasya Pupkin

TI__Mastermind 44680 points

Hi Vasya

Understood.

Here are the documents for the E3 version board:

Source files (Altium): /cfs-file/__key/communityserver-discussions-components-files/73/0447.E3_5F00_1-Source.zip

Project outputs: /cfs-file/__key/communityserver-discussions-components-files/73/8507.Project-Outputs.zip

Assembly drawing with annotations for all holes: /cfs-file/__key/communityserver-discussions-components-files/73/7532.ADC12JXXXX_5F00_E3_5F00_1_5F00_Assembly-Drawings-Markup-with-Dimensions.PDF

Best regards,

Jim B

0 Vasya Pupkin over 7 years ago in reply to Jim Brinkhurst1

Prodigy 40 points

Thank you so much, Jim!

Data converters

Data converters forum

ADC12J4000EVM: ADC12J4000EVM Rev. E3 dimensions