• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 980 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1298ECGFE-PDK: problem in installing software and driver

Ahmed Qureshi
Prodigy 175 points

Part Number: ADS1298ECGFE-PDK

i have problem with software installation in ADS1298ECG-PDK  can someone guide me and mention some steps needed for installation please also mentions Links.

i am using windows 10,

64 bit operating system

but after software installation i have error of "No firmware found"

and "download failed reset the hardware"

Now show me the proper way and also mention link for each and every thing that which driver and software is compatible with my operating system .

thank you.

  • 0
    TI__Guru 68916 points

    Hello Ahmed,

    Thanks for your post.

    Did you try resetting the MMB0? S3 in the top-right corner is the RESET button.

    If that doesn't work, please check the Device Manager and verify that the EVM is recognized as a USBStyx device. If it's unrecognized, you may need to point to the driver folder for the ADS1298RECG-FE: "C:\Program Files (x86)\ADS129xECG-FE\driver."

    Best Regards,