CCS/PGA900: source code

maryem zanned

Part Number: PGA900

Tool/software: Code Composer Studio

hello TI experts,

I'am working on PGA900, and I've been folowing the PGA900 software user's guide but I can't find the folder "source" wich contains "chip" folder, can you help me please !!!

over 7 years ago

0 Scott Cummins over 7 years ago

TI__Mastermind 31655 points

Hi Maryem,

When you run the .exe file from the firmware download it will create a folder in the c:/Program Files (x86)/PGA900FirmwareGeneric-1.5 folder by default. In that folder you will find a PGA900FirmwareGeneric-1p5.tar.gz file. You will need to use an unzipping program like 7zip to extract the files.

Note that you may need to move this file to a different location in order to unzip, since the Program Files folder is generally locked for modification except by administrators.

Once you unzip the file you will find the code folder in the directory that you unzipped to.

Regards,

0 maryem zanned over 7 years ago in reply to Scott Cummins

Prodigy 160 points

hello agin,
thank you very much, can you also tell me where should I unzip the folder and how will it be included in the CCS project ?
Regards

0 Scott Cummins over 7 years ago in reply to maryem zanned

TI__Mastermind 31655 points

Hello,

You can unzip it anywhere you like. You will import the project in CCS using the procedure for "Importing an existing project" from this wiki page: processors.wiki.ti.com/.../Importing_Projects_into_CCS

Regards,

0 maryem zanned over 7 years ago in reply to Scott Cummins

Prodigy 160 points

hi,
OK, got it, thank you :)

Data converters

Data converters forum

CCS/PGA900: source code