• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 333 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS131E08EVM-PDK: Evaluating Daisy Chaining

Martin Seeger
Expert 5411 points

Part Number: ADS131E08EVM-PDK
Other Parts Discussed in Thread: AM3359,

Dear Team,

our customer would like to evaluate the daisy chain implementation with the E08-EVM.

Can 2 EVMs easily be connected with an AM3359 EVM, or are there some other options?

Thanks and best regards
Martin

  • 0
    TI__Guru**** 182731 points
    Hi Martin,

    I'm not familiar with the I/O connectors on the AM3359 EVM, so I don't know what the challenge might be there to get the SPI interface wired up. From the standpoint of the ADS131E08EVM-PDK, the DAISY-IN pin is routed to header J4, which is next to the interface connector (J1). It would take a couple blue-wires and perhaps bending of a pin. We never really intended the EVM to be used in Daisy Chain mode, but it looks like it might be possible.