• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 546 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1262EVM-PDK: Not access to all options tabs

Vincent Kerbaul
Prodigy 40 points

Part Number: ADS1262EVM-PDK

Hi,

 

I use ADCPro to debug ADS1262.

When I launch the software, I get this windows.

I do not find how have acces to the other tabs on the left (calibration, register maps ..) and bellow (GPIO ...).

I suppose the windows have not the good dimension but I do no find how changed it.

Could you please help me? Thank you!

  • 0
    TI__Mastermind 44780 points
    Hi Vincent,

    Welcome to the TI E2E forums!

    Unfortunately this is a problem with all LabVIEW based applications, they don't always scale very well on different screen resolutions. What screen resolution is your monitor set to?

    On my computer I have 1080p (1920x1080) screen resolution and I can see all of the tabs... I would recommend trying different screen resolutions to see if the tabs are displayed properly on a different resolution setting.

    I also tried looking up keyboard shortcuts that might help you change tabs but wasn't able to find one, so changing screen resolutions is the only solution I can offer at the moment. Give it a try and please let us know if that helps resolves the issue!

    Best regards,
    Chris