• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 806 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

About MATLAB code

Kelly Ellen
Prodigy 10 points

Other Parts Discussed in Thread: IWR1642, DCA1000EVM

Hi，I am the user of IWR1642 EVM .I want to deal with the raw ADC dat use MATLAB ,there is only range FFT on capture_demo.m, there is no doppler FFT and angle FFT MATLAB code to get the target speed and angle information,please help me . Thanks.

  • Former Member
    0 Former Member
    Hello Kelly,

    Currently, there is no released example MATLAB code for additional post processing. The intention of the capture_demo was for users to be able to implement their own processing chain. For example processing chains you could refer to the C code implementations of the various demos available.

    Additionally, if you are interested in longer capture and an example post processing, there is the DCA1000EVM and the accompanying mmWave Studio software for adc capture and basic post processing.

    Thanks,
    Amanda