• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 636 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS54J20EVM: FMC compatility: LPC or HPC or both?

Mathias Hilaire6
Prodigy 10 points
Part Number: ADS54J20EVM
Other Parts Discussed in Thread: ADS54J20

Dear support team,

I would like to know if I can connect a FPGA-based board equipped with a FMC LPC (Low Pin Connector) connector to this ADS54J20 evaluation board.

Thanks and regards,

Mathias Hilaire

  • 0
    TI__Guru* 91947 points

    Mathias,

    Unless the LPC has serdes lanes routed on at least FMC pins A14/A15 and the reference clock on D4/D5, SYSREF on G9/G10 and SYNC on G12/G13, the answer is no. I do not know what FPGA board you plan on using, but all of the ones I looked at did not have these signals present on the LPC.

    Regards,

    Jim