ADS124S06: E2E

kinnari patel

Part Number: ADS124S06

hello sir ,

part number :ads124s06 I have taking adc count data from ic .now i want take 10 data and divide by 10.but get result only divide by 10.

over 7 years ago

0 Bob Benjamin over 7 years ago

TI__Guru** 113765 points

Hi Kinnari,

Welcome to the E2E forum! It sounds like you want to take an average of 10 conversions results. There are a number of different ways that this can be done, but in the end you need to add the ten conversion data results together (x + x1 + x2 +...x10) as a signed 32 bit integer then divide the added result by 10. Can you send me a code snippet of what you are attempting to do and I can give some direction on what you may be doing incorrectly.

Best regards,
Bob B

0 kinnari patel over 7 years ago in reply to Bob Benjamin

Prodigy 150 points

i have done

Data converters

Data converters forum

ADS124S06: E2E