• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 783 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPL0102EVM: Evaluation software and interfacing

Nir Flysher
Expert 3367 points

Part Number: TPL0102EVM

Dear Team,

I've just received the EVM for my customer however they didn't get any board enabling to interface this to a computer or any software.

Can you please advise how would you advise to evaluate the TPL0102EVM ?

Best regards,

Nir.

  • 0
    TI__Guru 56813 points
    Hi Nir,

    Unfortunately there is designated controller for that board. I suspect that the header was added as a generic interface, to be connected to any controller the user prefers, such as an MCU or data-generator. This device has a simple I2C interface, which should pair up with any I2C source.

    We are looking to refresh these EVMs for better usability, but that will likely be a few more months out.

    If you feel that the BU needs to support the customer in this directly, please contact me over email and I can try to help mock something up.

    Thanks!
    Paul
  • 0 in reply to Paul_Frost
    TI__Expert 3367 points
    Dear Paul,
    The customer will probably use a different solution eventually as they need better R accuracy.
    Thanks for your support.
    Regards,
    Nir.