• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 420 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADC12J400EVM +TSW14J56 and DAC38J84EVM + TSW14J56 with Matlab

TSW14J56EVM: ADC32Rf45EVM + TSW14J56EVM with Matlab

Aravind Venkitasubramony
Intellectual 835 points

Part Number: TSW14J56EVM

Hi

I am interested in capturing a fixed amount of data from the ADC32RF45EVM using the TSW14J56EVM as .bin file and do this over and over autonomously. Is there a way to get this going through MATLAB by interfacing with the HSDC Pro GUI? 

  • 0
    TI__Intellectual 2750 points
    Hello Aravind,
    Have you had a look at the automation examples in
    C:\Program Files (x86)\Texas Instruments\High Speed Data Converter Pro\HSDCPro Automation DLL\Manual and Examples

    There is a MATLAB example for setup and capture event I think you can use to start.

    After the capture trigger, you can copy the .bin files off. They will be over-written on the next capture.

    Regards,
    Brian