• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 444 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8684A: Tying RESET High?

Alpha H
Genius 10855 points
Part Number: ADS8684A


Hi team,

If I only plan on resetting the ADS8684A in software and not using the RST/PD pin, can I tie the RST/PD pin high? Or should I keep it floating?

Thanks,

Arthur Huang

  • 0
    TI__Mastermind 25030 points
    Hello Arthur,
    You should still pull the pin high, this ensures the pin does not inadvertedly reset or enters power down mode.
    I must add, it is good practice to have a GPIO connected to the reset pin, just in case
    Regards, Cynthia