• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ads8588s

Namrata Patil
Prodigy 20 points
Other Parts Discussed in Thread: ADS8588S

HI,

My question is regarding to ADS8588S ADC converter. what will the delay in CONVST signal falling to raising edge. 

and the BUSY pin is not going to high after initiate the convertion, so i wanted to know how to initiate the conversion is ADS8588S

  • 0
    TI__Mastermind 45415 points

    Hello Namrata,

    Welcome to E2E community.

    The CONVSTA/B pulse low time should be longer than 25ns, please refer to the specification tPL_CN from ADS8588S datasheet as below, it will better to check the power supplies on ADC, the connections on the board also the schematic, thanks.

    Best regards

    Dale