Other Parts Discussed in Thread: ADC32RF80
Dears.
When setting "ADC32RF80_LMF_8411" in GUI, Disable B channel. Then, is it correct to operate with L = 8, M = 4 for A channel?
Does it work in the following format?
M0 = A channel I_data,
M1 = A channel Q_data
L0 = A channel I data [15:8]
L1 = A channel I data [7:0]
L2 = A channel Q data [15:8]
L3 = A channel Q data [7:0]
I would like to know the value of thermal resistance change due to heat treatment on EVM.
Thank you.
