DAC38RF89: Ask for help of DAC38RF89 configuration.

user5148757

Part Number: DAC38RF89

DEAR：

Hi，last time I got it,but now I get a new project,which using the DAC38RF89 too,and LMFS = 41380 (the 12bit input resolution,real input),the serdes rate = 9G,the DAC_CLK = 2.4G derived from the dac_clk pin directly.

can you give me a .cfg file ?.

Thank you ,very much.

Best wish.

Xuan Guo

over 6 years ago

0 Ebenezer Dwobeng over 6 years ago

TI__Genius 9695 points

Hi Xuan,

I am looking into this.

Thanks,
Eben.

0 user5148757 over 6 years ago in reply to Ebenezer Dwobeng

Prodigy 140 points

Hi Eben,

Thank you for your answer.

Today ,I just got the idea,and I thought I got the way to slove this problem.

Now,I have a new idea,I want the DAC38RF89 worked at the LMFS=82380,

So ,I can put a complex baseband data of 8 lanes to the DAC,and get the MSPS of 3333 .

Can you give me a .cfg file?

Best wishes

Xuan

0 Ebenezer Dwobeng over 6 years ago in reply to user5148757

TI__Genius 9695 points

Hi Xuan,

Please download the DAC GUI from here: www.ti.com/.../slac722
If you do not have an EVM, you can run the GUI in simulation mode and dump the register configuration to a file. See EVM users guide, section 3 for more details: www.ti.com/.../slau671a.pdf

Thanks,
Eben.

0 user5148757 over 6 years ago in reply to Ebenezer Dwobeng

Prodigy 140 points

Dear Eben,

Thanks very much.

But ,If I want to use the wide-duc mode of LMFSHd=82380,The DAC GUI did not give this mode through the tab of 'Quick Start' .Dose The dac38rf8 can support the mode of LMFSHd=82380?

Best wishes.

Xuan