• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 48 subscribers
  • Views 695 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler: TSW14J57EVM+ADC12DJ3200/ADC08DJ3200

guangxin zhou
Prodigy 10 points

Other Parts Discussed in Thread: ADC12DJ3200, ADC08DJ3200, TSW14J57EVM

Tool/software: TI C/C++ Compiler

I want to know if it can write data to hard disk in real time at 6.4 Gsps sampling rate through its USB 3.0 interface. （TSW14J57EVM+ADC12DJ3200/ADC08DJ3200） thanks。

  • 0
    TI__Expert 4880 points
    guangxin,

    I have forwarded your question to a device expert. They should be with you shortly.

    Thanks

    Yusuf
  • 0 in reply to Yusuf%20Agoro
    TI__Guru* 91947 points

    Guangxin,

    6.4Gsps is not possible. The max practical USB3.0 throughput possible is only 2.7Gbps to transfer the data to PC RAM without any post processing. Writing to hard drive and any channel specific data post processing will add additional overhead to this.

     

    You can try to utilize the whole DDR memory on the board to get a huge real time capture then transfer the memory to PC in non-real time manner.

    Regards,

    Jim