• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 188 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1299EEGFE: How to verify that the board is working correctly?

Mattias Akerman
Prodigy 10 points
Part Number: ADS1299

I was able to download and install the software on Windows XP and connect the ADS1299EEGFE evaluation kit.

I powered it with 4x AA batteries.

I am not sure how to connect a couple of electrodes to test my board.

Any tutorial or video for this?

  • 0
    TI__Guru 55062 points

    Hi Mattias,

    Thanks for your post!

    Instead of connecting electrodes first, how about trying a sine wave from a signal generator?

    This video series should help for electrode connections: https://training.ti.com/how-measure-ecg-introduction-what-ecg?cu=1128637