ADS1298ECGFE-PDK: error is coming while coneecting the ADS1298ECG evm to software GUI of it

vasanth kumar78

i am trying to install GUI software of ADS1298ECG FE PDK .based on this link (https://e2e.ti.com/support/data-converters/f/73/t/656505?tisearch=e2e-sitesearch&keymatch=ads1298RECG-FE%20PDK%20windows%2010

over 6 years ago

0 Alexander Smith over 6 years ago

TI__Guru 55062 points

Hi Vasanth,

Thanks for your post!

Make sure that you un-install all of the drivers and software before attempting to re-install according to the steps in the link.

0 vasanth kumar78 over 6 years ago in reply to Alexander Smith

Intellectual 955 points

Hi alex,

we tried like you said way ,even we tried in new PC also, but we could not get. still showing showing error only. Please provide alternative solution to install since we tried a lot of ways.

0 Alexander Smith over 6 years ago in reply to vasanth kumar78

TI__Guru 55062 points

Hi Vasanth,

Make sure that you follow all of the steps in the user's guide as they are written, along with the information in the post.

Make sure that you un-install ALL drivers before trying again.

0 vasanth kumar78 over 6 years ago in reply to Alexander Smith

Intellectual 955 points

HI,
you said un install all drivers.you mean whether drivers of ADS1298ECG FE EVM or along PC drivers also?.
i un install the all drivers related to ADS1298ECG only and then i installed but it is showing error, wat i mentioned previously.

Data converters

Data converters forum

ADS1298ECGFE-PDK: error is coming while coneecting the ADS1298ECG evm to software GUI of it