• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 497 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8363EVM: ADC evm software control

Feng bin Su
Expert 8730 points
Part Number: ADS8363EVM
Other Parts Discussed in Thread: ADS8363

Hello team,

My customer would like to use the ADS8363.  Do support the evaluation software or adc GUI for this part?

Or there is no any support on it? Because I didn't see any document information about software on ADS8363 EVM web page.

Thanks a lot for your reply.

  • 0
    TI__Guru 66246 points
    Hello Feng,

    Thank you for your post.

    The ADS8363 was released as a standalone EVM without a controller or any software. Therefore, we do not offer a GUI for this EVM.

    You can suggest to your customer that they try to connect the evaluation board to one of the C2000 DSP experimenter kits. The Application Report: "Interfacing to the ADS8363 Pseudo-Differential Operating Mode" (SLAA633) discusses the interface connections and provides code snippets:

    www.ti.com/.../slaa633.pdf

    Best Regards,