• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 2 answers
  • Subscribers 47 subscribers
  • Views 433 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1299: Real time Data Capture

Venkata Suresh Rayudu
Prodigy 200 points

Part Number: ADS1299

Hi,

Is it possible to capture data in real time using MMB0+ADS1299 EVM? I do see "Acquire/Continuous" options. But, I would like to dump data to a file in real time.

Is it possible to modify the code in MMB0(TMS320) to do some arithmetic on DSP?

Thanks,

Venkata

  • 0
    TI__Guru 60392 points
    Hi Venkata,

    It is not possible to display data in real time using the MMB0 + ADS1299EEGFE-PDK.

    Keep in mind that code is provided “as-is” and modifications/changes are not supported. Also note that this software is optimized for our evaluation platforms and therefore may not be well suited to end-equipment applications.
  • 0 in reply to Alexander Smith
    Prodigy 200 points

    Hi Alex,

    Thanks for the reply.

    Can you please let me know if it is possible to modify the MMB0 motherboard code? If yes, I am looking for a file that can help me guide through the process of changing the capture code.

    Thanks,

    Venkata

  • 0 in reply to Venkata Suresh Rayudu
    TI__Guru 60392 points
    Hi Venkata,

    Yes it is possible. There is not a file that can help guide you through the process of changing the capture code.

    As I stated in my previous post: Keep in mind that code is provided “as-is” and modifications/changes are not supported. Also note that this software is optimized for our evaluation platforms and therefore may not be well suited to end-equipment applications.