• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 48 subscribers
  • Views 486 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1293EVM: ADS1293EVM

Saul Kullok
Prodigy 20 points

Part Number: ADS1293EVM
Other Parts Discussed in Thread: ADS1293

Where a 3 lead ECG cable with the required socket of 9 Pin  to plug into the one of this EVM can be purchased?

  • 0
    TI__Guru 61322 points
    Hi Saul,

    We do not have a recommended vendor for ECG cables.
  • 0 in reply to Alexander Smith
    Prodigy 20 points
    For us to use the ADS1293 EVM an ECG analog impute is required. But after I received this EVM we find out that the 9 Pin socket of this EVM is not the standard one of the ECG cables. Nevertheless, the Website of Texas Instruments shows this EVM connected to an ECG cable. The decision to purchase two units arise from this website, because our development of a new device requires the ECG signals. Can you please help to find an ECG cable that can be plugged to the EVM that I purchased?
  • 0 in reply to Saul Kullok
    TI__Guru 61322 points
    Hi Saul,

    The 9 pin socket is called a DB9 connector and you can use test point IN1-IN6 as an alternative input connection for the device.

    As Texas Instruments does not manufacture ECG cables I cannot recommend one, and it is the customer's responsibility to purchase their own.