• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 47 subscribers
  • Views 665 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1292R: ESP32

Krishnini Manivannan
Prodigy 10 points

Part Number: ADS1292R

Hello,

I have some problems increasing the clock frequency of ads1292r when I read data from it using SPI. I used setClock function and setClockDivider function but they don't seem to increase or decrease the frequency. the frequency remained at 1kHz.

Do you have some idea, what could be wrong?

Best Regards.

  • 0
    TI__Guru 60122 points

    Hi Krishnini,

    The ADS1292R does not have a setClock or setClockDivider function that I am aware of. 

    Please see page 5 of the datasheet for the clock specifications. 

    Are you trying to change the output data rate? 

    If so, you will need to change the register settings of CONFIG1: Configuration Register 1.