• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 46 subscribers
  • Views 969 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS1278: Labview GUI source code for ADS1278 interfaced with MMBO.

ADS1278EVM-PDK: Need Labview GUI source code for ADCPro for ADS1278EVM-PDK plugin

Mohammad Khair1
Prodigy 20 points
Part Number: ADS1278EVM-PDK
Other Parts Discussed in Thread: ADCPRO, ADS1278

Hello,

I am working with the high speed data acquisition ADS1278EVM-PDK evaluation board with the MMB0 for data acquisition for electrophysiologic sensing of high frequency signals. I appreciate if you can send me the source code for the Labview GUI for the ADS1278EVM for acquiring and saving data which includes ADCPro application, as I need to modify for my particular application. Much appreciate your support and help. Thank you in advance.

Mohammad K.

  • 0
    TI__Mastermind 46340 points

    Hello Mohammad,

    Welcome to TI's e2e community.

    The source files are now included in the software downloads.

    Go to the ADCPro web page to download ADCPro.

    http://www.ti.com/tool/ADCPRO

    After you have installed the software, you can find the ADCPro source files in the following directory.

    C:\Program Files (x86)\ADCPro

    You will also need to download and install the ADS1278 plug-in, ADS1278EVM-PDK-SW.

    This software is located on the ADS1278EVM page under the 'Order Now' Section.

    http://www.ti.com/tool/ADS1278EVM-PDK

    After you have installed the software, you can find the ADS1278 source files in the following directory.

    C:\Program Files (x86)\ADCPro\plugins\evm\ADS1278

    Please note there is no support for using these source files.

    Regards,
    Keith N.
    Precision ADC Applications

  • 0 in reply to Keith Nicholas
    Prodigy 20 points

    Hello,

    Thanks for your response. Unfortunately the source code provided either requires a password to see the source code, or the Labview VIs lack the diagram so we are unable to open them in Labview for editing. I appreciate if you can provide the source files that I can edit to my email listed in the TI account. This will accelerate our development significantly.

    Much appreciated

    Mohammad K.

  • 0 in reply to Mohammad Khair1
    TI__Mastermind 46340 points

    Hi Mohammad,

    Unfortunately, the source code included with the software is all we can share.  ADCPro was intended only for the evaluation of the ADC's analog performance. 

    As you are developing code to communicate with the ADS1278, if you have questions on the timing or communications protocol, you can always post follow-up questions to the e2e forum.

    Regards,
    Keith