• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 249 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Is an ARM microcontroller with HDQ protocol possible?

Rafael Souza
Prodigy 90 points
Other Parts Discussed in Thread: MSP432E401Y

Hello Friends.

Is it possible to implement an ARM microcontroller with 1-Wire communication protocol one way, to communicate with a device with only the HDQ communication protocol?
Is there any driver or programming that does this?
If anyone can explain a tutorial on how to do it, I would be very grateful.

Thank you helps.

  • 0
    TI__Guru* 97415 points

    Rafael,

    This may not be the correct forum to post a question about HDQ protocol. Here, we generally handle data converter questions.

    However, I did find an application note on HDQ Communication using a UART:

    Several of our processors to have UARTs. For example the MSP432E401Y does have the UART.

    When it comes to the implementation. Again, we don't have the expertise in this particular forum. I would check with the MSP Low Power Microcontroller Forum here:

    Joseph Wu