Other Parts Discussed in Thread: ADS58J64, LMK04828, , ADS54J64, ADS58J64EVM
Hello
The mode 6 (IQ 125MSPS) is not supported in HSDC pro software. We would like to try it in our carrier board with FMC connector.
Is still possible set the mode 6 with ADS58J64 EVM GUI (JP3 set to USB mode)?
We would like to bypass CPLD with JP3 set to FMC mode.
What is funcionality of CPLD in this configuration?
What is purpose of signals FMC_D5, FMC_D6 and FMC_DIR_CONTROL?
Thanks and Regards
Daniel