Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 282 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSC2003: External REF

Shota Mago
Expert 7260 points
Part Number: TSC2003

Hi team,

Is it necessary to prepare external reference for TSC2003?

i.e. Can TSC2003 use touch-panel by internal reference?

Best regards,

Shota Mago

  • 0
    TI__Mastermind 22950 points

    Hello Shota, 

    The internal 2.5V reference is only used for Vbat, AUX, or temperature measurements. The Touch panel measurements are taken using ratiometric conversions. Looking at the internal diagram, you can see that the ADC REF is taken directly from VDD. This also means that no external VREF is needed. 

    Regards,

    Aaron