• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 45 subscribers
  • Views 166 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

MSC1213Y5: Max thermal profile peak temp

Timothy Gill1
Prodigy 10 points
Part Number: MSC1213Y5

What is the maximum oven peak temp for this components.  We are replacing a lot of these components because they are failing at test.  Please advise.

  • 0
    TI__Guru** 113765 points

    Hi Timothy,

    Welcome to the E2E forum! The reflow information is on the device product page under the Quality and packaging tab.  In the table for Quality and environmental data there is a column for MSL Rating / Peak Reflow.

    http://www.ti.com/product/MSC1213Y2/pinout-quality


    For the MSC1213 the rating is classified as Level-4-260C-72 HR.  The ratings are fully explained in the following document:

    http://www.ti.com/lit/an/spraby1a/spraby1a.pdf

    You haven't stated what kind of failures you are seeing, but what is seen most often is open packaging where the humidity exceeds the nominal for the reflow process.  If this is the case, you may need a pre-bake of the devices to remove any moisture from the devices prior to reflow.

    Best regards,

    Bob B