VSP1000: is there is any simulation available for vsp1000

VISHAL KALWANI

Intellectual 705 points

Part Number: VSP1000

Hi is there is any simulation available for vsp1000 either in tina,ibis model or hspice.

over 6 years ago

0 Praveen Aroul over 6 years ago

TI__Guru 50026 points

Hi Vishal,

We don't have IBIS, TINA or HSPICE models for VSP1000.

0 VISHAL KALWANI over 6 years ago in reply to Praveen Aroul

Intellectual 705 points

IDRV determines the drive strength of the output buffer as mention in datasheet. How?So after vsp1000 this much distance should be there at receiver how could i can determine.

0 Praveen Aroul over 6 years ago in reply to VISHAL KALWANI

TI__Guru 50026 points

Hi Vishal,

The drive strength depends on your application bandwidth requirements.

IDRV controls the bandwidth which controls the output response (rise time, fall time etc..)

The datasheet lists the typical BW vs IDRV for a load of 22pF.

Data converters

Data converters forum

VSP1000: is there is any simulation available for vsp1000