ADS124S08: Can I have an example code for python programming?

Hi Derick,

Welcome to the E2E forum!  Unfortunately we do not have any Python examples for the ADS124S08.  On the landing page for the ADS124S08 we do have an example project using 'C' found under the Design and Development tab and scrolling down to Software.  I include the shortcut to the zip file below:

http://www.ti.com/lit/zip/sbac159

And there is a Linux driver available that may be helpful:

https://github.com/torvalds/linux/blob/master/drivers/iio/adc/ti-ads124s08.c

Your must have all supplies at nominal operating voltage and the RESET pin pulled high on the ADS124S08.  Also, you must make sure that CS is low throughout the entire communication transaction.  Can you send me your schematic and scope/logic analyzer shots of your attempted communication?

Best regards,

Bob B

Good day Bob!

Thanks for reminding about the RESET pin! Now, I got the connection with ADS124S08.

Thanks!

Best regards,

Derick