DDC264EVM: Is there a way to continuously record the data from the 128 or 256 channel device?

Yue Gu

Part Number: DDC264EVM
Other Parts Discussed in Thread: DDC264

Now, the device can only save data by clicking 'fast data'. However, the data recorded and converted has a limited length. Is there a way to continuously trigger the device and record the data for a longer period, such as 1 minute?

over 5 years ago

0 Praveen Aroul over 5 years ago

TI__Mastermind 49926 points

Hello Yue,

Welcome to the TI e2e forum!

Due to the limitation in the GUI SW and the FPGA memory, continuous trigger and data record is not possible.

0 Yue Gu over 5 years ago in reply to Praveen Aroul

Prodigy 20 points

Hi Paveen,

Thanks for your reply. Can you recommend any other similar product that can do the continuous recording? Or is there any means to realize the function on DDC264 by extending the FPGA memory or using MATLAB instead of the GUI SW to control the EVM?

Thanks!!

Yue

Data converters

Data converters forum

DDC264EVM: Is there a way to continuously record the data from the 128 or 256 channel device?