Hi All,
This email to ask you technical information regarding DAC121S101QCMK/NOPB.
My customer encountered a problem on DAC121S101QCMK / NOPBI, for which they wanted to carry out tests.
While doing so they realized that in normal use conditions some values read by the instrumentation are not in line with what is reported in the table Electrical Characteristics of the DS.
In particular, customer realized that the measured output impedance is about 8 Ohm, compared to 1.3Ohm reported in DS.
In this regard, I would like to ask you your opinion, why customer found this difference between declared value and measured value?
Many Thanks,
Antonio