ADS1278EVM Rev A

quark

Other Parts Discussed in Thread: ADS1178

Hello,

I have a ADS1278EVM board but it is in PWB Revision A.

Can someone at TI send me the Rev A of the schematic? It appears to be VERY different than the Rev C documentaiton that is currently on the TI website.

Thank you!

over 14 years ago

0 Tony Calabria over 14 years ago

TI__Mastermind 43915 points

Hi Quark,

We included the ADS1278EVM Rev. A schematic in the User's Guide. It is located before the Rev. C schematic and should be found on page 34 of the user's guide.

Regards,

Tony Calabria

0 quark over 14 years ago in reply to Tony Calabria

Expert 2220 points

That one is for the ADS1178EVM; not what we need (ADS1278EVM).

The ADS1178 Schematic does not match what we have. For example, the ADS1278EVM Rev A have the CLK signal connected to J18, which is a 3-pin header.

The board have these markings on it:

6492526 PWB Rev A

6492528 PCA Rev A

6492525 BOM Rev A

0 Bob Benjamin over 14 years ago in reply to quark

TI__Guru** 113765 points

Quark,

I've attached the ADS1278EVM Rev A schematic.

Best regards,

Bob B

6492528_ADS1278_SCH_A.pdf

Data converters

Data converters forum

ADS1278EVM Rev A