TLK2711 EVM kit module

Michele Marino

Prodigy 25 points

Other Parts Discussed in Thread: TLK2711-SP

Is there an EVM available for the TLK2711?

Thanks,

Michele M.

over 15 years ago

0 WYA over 15 years ago

TI__Intellectual 2265 points

Hi Michele,

The TLK2711 is NRND and not recommended for new designs. The TLK2711A is available. If you are interested in getting an EVM, please send me a friend request and we can go from there.

0 Michele Marino over 15 years ago in reply to WYA

Prodigy 25 points

Thanks for the answer.

In the main page I can see a technical article titled "TLK2711 Serdes EVM Kit Setup and Usage", but it is incomplete.

Can you send me the complete technical document with schematic and printed circuit board.

Many Thanks

Michele Marino

0 WYA over 15 years ago in reply to Michele Marino

TI__Intellectual 2265 points

Michele,

Could you please elaborate on what you mean by "incomplete"? What information are you needing that you can not find? Please send me a friend request to discuss further.

0 WYA over 15 years ago in reply to Michele Marino

TI__Intellectual 2265 points

Michele,

I have found the person who can assist you on this. I will be moving this posting to the HiRel forum.

0 Wade Vonbergen over 15 years ago in reply to WYA

TI__Guru 62930 points

Michelle,

We had a little difficulty moving the post to the HiRel forum. HiRel is the group that owns the space level version of this device. So for now, I will reply here.

I am including the schematic for the EVM.

I do have the layout files available. I can email them to you. Please send me an email at w a d e v b (at) t i . c om.

Replace (at) with @ and no spaces.

Regards,

Wade

TLK2711-EVM_schem.pdf

0 gan lu1 over 13 years ago in reply to Wade Vonbergen

Prodigy 20 points

Wade,

We have two boards based the tlk2711 ,but in the debugging process,I encountered a lot of problems can not be solved.So i suspected to be a problem with the PCB.

Could you send the layout files of the TLK2711EVM TO me ? Thanks.

Regards,

Lei

0 Wade Vonbergen over 13 years ago in reply to gan lu1

TI__Guru 62930 points

Lei,

Here are the layers for the TLK2711-SP evm. 7217.TLK2711_layers.pdf

If you provide some more information, I can possibly help you pinpoint the issues.

Do you see data transmission? Any eye diagrams to post? Schematic?

What does your clock look like? What amount of jitter?

What media are you using, and what is the distance being transmitted? Matched lines?

Regards,

Wade

Data converters

Data converters forum

TLK2711 EVM kit module