• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 48 subscribers
  • Views 628 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS6425, source code for FPGA, and simultaneous data retreival

Timothy Starr
Expert 2445 points

Other Parts Discussed in Thread: ADS6425

Hi Richard-

Will the ADS6425 supply data continuously and simultaneously for all 4 channels?

Please send me the entire source code for the FPGA on the TSW1200. Thanks and Best Regards,

Tim Starr, on behalf of Doble Engineering

Senior Field Applications Engineer

High Performance Analog

Avnet Electronics

400 Riverpark Drive, Suite 300

North Reading, MA 01864

phone: 978-898-4304

timothy.starr@avnet.com

  • 0
    TI__Mastermind 29220 points

    Tim,

    file sent. 

    The ADS6425 certainly outputs the data for all channels simultaneously.   The TSW1200 software for capture, however, is only set up to capture and process one channel at a time.  But that is a software limitation for the GUI, not a hardware limitation.  In fact, we also can make available a more stripped-down MATLAB user interface that does capture and process all four channels simultaneously.

    Regards,

    Richard P

     

  • 0 in reply to Richard Prentice
    Prodigy 10 points

    Hi Richard-

    We are using ads6425 for school project. the ads6425 is configured to use 2-wire and DDR for data transfer. Sadly, our code doesn't work.

    Could you give some suggestion on interfacing the ads, such as DDR, and clock alignment?

    Could you also send me the entire source code for the FPGA on TSW1200?

    Thanks and Best Regards,

    Haolin

    Haolin198951@gmail.com