• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 267 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DAC38J84EVM: NCO MODE

DAC38J84: DAC output Spur calculator

Asaf Samira
Prodigy 170 points
Part Number: DAC38J84

Hi,

Is the DAC output Spur calculator given in the following question : 

https://e2e.ti.com/support/data-converters/f/73/t/706085?tisearch=e2e-sitesearch&keymatch=dac%25252520spurs

also relevant for DAC38J84?

I can`t figure out how to use this calculator, What fields should I fill?

Thanks,

Asaf

  • 0
    TI__Guru* 91947 points

    Asaf,

    Yes this will be relevant. You would enter your DAC sampling rate at the top left, then bandwidth of interest using the next two entries below the DAC sample rate. The first entry is the bandwidth starting frequency and the second is the stopping frequency. The viewing bandwidth allows you to set markers to see which harmonics are falling in the band of interest. The graph will update as soon as values are entered and you press enter.

    Regards,

    Jim