ADS131M08: ADS131M08 EVM GUI installation issue

Yunjing Wang1

Part Number: ADS131M08

Hi team,

I am using ADS131M08EVM and installing ADS131M08 GUI to my own laptop now, but there are some installation issues caused by Labview runtime.

It requires installation of Labview runtime to open ADS131M08EVM GUI, but I still cannot open the GUI after installed Labview runtime.

See below error info and my Labview rumtime installation. Can you tell me why I still cannot open this GUI? Is there anything I did wrong?

Thank you!

over 6 years ago

0 Joseph Wu over 6 years ago

TI__Guru** 100775 points

Yunjing,

I haven't seen this issue before. Could you please try uninstalling the software and re-installing it? One thing that you may need to check is to install the software as administrator.

Joseph Wu

0 Joseph Wu over 6 years ago in reply to Joseph Wu

TI__Guru** 100775 points

Yunjing,

I haven't heard from you in a while and I just wanted to check on your install of the ADS131M08EVM GUI.

I'll close this post for now, but if you're still having problems, post back and we can try to help again.

Joseph Wu

Data converters

Data converters forum

ADS131M08: ADS131M08 EVM GUI installation issue